This is the authors' abstract. We don't add key points for this paper.
We aim to develop the breast bolus by using a 3D printer to minimize the air-gap, and compare it to commercial bolus used for patients undergoing reconstruction in breast cancer.The bolus-shaped region of interests (ROIs) were contoured at the surface of the intensity-modulated radiation therapy (IMRT) thorax phantom with 5 mm thickness, after which the digital imaging and communications in mdicine (DICOM)-RT structure file was acquired.The intensity-modulated radiation therapy (Tomo-IMRT) and direct mode (Tomo-Direct) using the Tomotherapy were established.The 13 point doses were measured by optically stimulated luminescence (OSLD) dosimetry.The measurement data was analyzed to quantitatively evaluate the applicability of 3D bolus.The percentage change of mean measured dose between the commercial bolus and 3D-bolus was 2.3% and 0.7% for the Tomo-direct and Tomo-IMRT, respectively.For air-gap, range of the commercial bolus was from 0.8 cm to 1.5 cm at the periphery of the right breast.In contrast, the 3D-bolus have occurred the air-gap (i.e., 0 cm).The 3D-bolus for radiation therapy reduces the air-gap on irregular body surface that believed to help in accurate and precise radiation therapy due to better property of adhesion.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ha et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: