This is the authors' abstract. We don't add key points for this paper.
A 6-h laboratory test protocol was developed to assess the potential effect of consumer products on anaerobic sludge respiration in septic tanks. Respiration was measured in terms of the amount of gases produced by sludge microbes from cellulose degradation at about 21°C. The optimum test conditions for maximum gas production were determined to be: (1) 10 to 20 g (dry wt.) of sludge per liter was adequate and sludge could be stored at 2 to 4°C for up to 4 d, (2) 2.5 to 5 g of cellulose substrate per liter was sufficient, and (3) 25 ml of modified synthetic sewage feed per liter provided trace levels of nutrients. The protocol was used to develop the sodium chloride reference toxicity test. The 96-h EC50s of sodium chloride for anaerobic sludge were between 3.5 and 10 g/L. The protocol was also used to test four consumer products to assess their safety to sludge microbes in septic tanks. The 24- to 96-h EC50s and 96-h no-observed-effect concentrations (NOECs) of test products were calculated. The potential effect of one of the products, a laundry dry bleach, on sludge microbes in a septic tank was assessed using the NOEC value.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Vaishnav et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: