Answers are grounded in this paper and cite their sources.
ZK60 Mg/5083 Al composite plates with cold sprayed Cu powder interlayers were fabricated via hot rolling. The influence of Cu powder on the interfacial microstructure, mechanical properties, and crack propagation behavior of the composite plates was investigated. Results showed that the Cu powder formed a serrated Mg/Cu/Al interface with dispersed nano-polycrystalline and amorphous phases (CuMg 2 , Al 2 Cu and Al 7 Cu 3 Mg 6 ), exhibiting semi-coherent boundaries that enhanced the interfacial bonding strength. Crack propagation analysis revealed that the cracks required additional energy for the penetration of the Cu powder, and cracks preferentially propagated along the Cu/Al interface rather than the Mg/Cu interface. Additionally, the Cu powder promoted dynamic recovery and recrystallization of the grains near the interface, refined the grains (Mg grain size reduced by 27%), and lowered the residual stress, thus improving the deformation compatibility of Mg/Al composite plates. The synergistic effects of dispersed phases, grain refinement, and stress reduction contributed to an 89% improvement in peel resistance.
No takes yet. Share an insight, caveat, or question.
ZHANG et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: