Answers are grounded in this paper and cite their sources.
In-situ quality assurance for Laser-based Powder Bed Fusion of Metals (PBF-LB/M) requires robust non-destructive testing to mitigate stochastic anomalies such as porosity or lack of fusion. A typical monitoring challenge arises during simultaneous thermal excitation and observation since overpowering laser reflections saturate the camera sensor and obscure the visibility of subtle thermal diffusion. The gated synchronization of the camera integration window with the pulsed modulation of the laser prevents detector saturation by restricting data acquisition to the inactive phases of the laser. This strategy substantially decouples the thermal emission signal from intense specular and diffuse reflections of the excitation source. Additionally, the study addresses the characteristics of the excitation source. To prevent any permanent metallurgical modification the laser focus is positioned 100 mm below the working plane. This defocusing results in a measured spot diameter of 3.7 mm and creates a spatial energy distribution that approximates a Gaussian profile. The methodology identifies subsurface voids with actual mean diameters as small as 111 µm at depths of 20 µm to 40 µm. Signal attenuation from thermal diffusion establishes the methodological boundary at a depth of 120 µm.
No takes yet. Share an insight, caveat, or question.
Sauer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: