Answers are grounded in this paper and cite their sources.
The magneto-thermoelectric generator (MTG) converts wasted thermal energy into electrical energy in two steps. The first step involves thermal to mechanical energy conversion through balance of magnetic and elastic forces and the second step involves mechanical to electrical energy conversion through piezoelectric effect. The requirements for soft magnetic material in improving the efficiency of first step were identified and met through the design of a composite architecture. The Curie temperature of La (1–x) Sr x MnO 3 can be engineered to be near room temperature by modifying the Sr content. Composite of La 0.85 Sr 0.15 MnO 3 (LSMO) and Ni 0.6 Cu 0.2 Zn 0.2 Fe 2 O 4 (NCZF) was found to exhibit high saturation (M s ) and remnant (M r ) magnetization magnitude while maintaining the soft magnetic nature. Two-step sintering was found to prevent the inter-diffusion of LSMO and NCZF phases and provided high density without grain growth. The LSMO-NCZF (70:30 wt %) composite exhibited a large variation in M s with respect to the change in temperature near Curie temperature which meets the requirements for efficient operation of MTG. The fabricated MTG using LSMO-NCZF (70:30 wt %) composite reached 0.2 Hz operational frequency and generated electrical output voltage of 2 V p–p and peak power of 17 µW under the thermal gradient of 80 °C (0 °C/80 °C).
No takes yet. Share an insight, caveat, or question.
Song et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: