Answers are grounded in this paper and cite their sources.
Bioresorbable magnesium alloys represent a promising class of materials for temporary osteosynthesis implants; however, their clinical application is limited by excessively rapid degradation rates. This study investigates the effect of severe plastic deformation via multiaxial forging («abc»-pressing) on the microstructure, microhardness, and corrosion behaviour of an Mg-Nd-Zr system alloy (Nd–3.0 wt.%, Zr–0.4 wt.%, Zn–0.2 wt.%) for biomedical applications. Deformation processing was performed at 350°C with up to 9 cycles. Microstructural characterisation was conducted using optical microscopy and scanning electron microscopy with energy-dispersive spectroscopy. Corrosion behaviour was evaluated by potentiodynamic polarisation in 0.9% NaCl solution simulating physiological conditions. Multiaxial forging induced grain refinement from 56±21 μm to 48±18 μm after 5 deformation cycles, accompanied by transformation of the continuous intergranular Mg₁₂Nd β-phase network into uniformly distributed spheroidised particles. Decomposition of the supersaturated α−Mg solid solution resulted in Nd depletion of the matrix (from 2.2 to <0.6 wt.%) and concurrent β-phase enrichment (up to 30.6 wt.% Nd). Microhardness measurements revealed an increase in mean values across all specimen faces following deformation processing, with a significant reduction in data scatter, indicating improved structural homogeneity attributable to increased dislocation density and uniform distribution of secondary phases. Electrochemical testing demonstrated a 70% reduction in corrosion current density (from 347 to 106 μA/cm²) and corrosion rate (from 7.94 to 2.44 mm/year), with electrochemical data suggesting a tendency toward more uniform degradation, consistent with post-corrosion observations from the same alloy processed by an alternative SPD method. The improved corrosion resistance is attributed to reduced galvanic potential differences between the α−Mg matrix and β-phase precipitates, secondary-phase fragmentation, and modification of the grain boundary network. These findings demonstrate that multiaxial forging is an effective thermomechanical processing route for optimising the property profile of Mg-Nd-Zr alloys for bioresorbable implant applications.
No takes yet. Share an insight, caveat, or question.
Greshta et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: