Answers are grounded in this paper and cite their sources.
A planar Doppler velocimetry technique was developed and used to measure two components of instantaneous velocity in an ideally expanded, Mach 2, freejet. The technique utilizes a molecular e lter as a frequency discriminator and uses two cameras to resolve two components of velocity on a plane that is illuminated by a laser sheet. Careful formation of the laser sheet, proper calibration of the splitter/recombiner imaging system, and precise image registration were found to be critical steps in the technique. The velocity measurements obtained with this techniquewerecompared with referencelaser Dopplervelocimetry measurementstaken in thesame e owe eld. The mean velocity results were in very good agreement with the reference measurements, and the turbulence results captured the correct trend but were higher than thereference results. A detailed error analysis describes the error sources inherent in the planar Doppler velocimetry technique. For the current two-component planar Doppler velocimetry system, theestimated uncertainty forthe xandy componentsofvelocity were §5and §3:5%ofthejet centerline velocity, respectively. The errors in the x component of velocity were within the estimated uncertainty. The errors in the y component of velocity exceeded the estimated uncertainty. Possible causes for this difference are discussed.
No takes yet. Share an insight, caveat, or question.
Clancy et al. (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: