Answers are grounded in this paper and cite their sources.
In this research work, multi-layered composites of pure and hybrid woven fibre mats were fabricated using microwave-assisted compression moulding process. The hybrid composite consisted of jute and kenaf fibre as reinforcement having weight fraction of 29 ± 1%, while high-density polyethylene acted as the matrix. The laminate of multi-layered composites was fabricated by stacking the kenaf and jute woven fibre mats with high-density polyethylene matrix, resulting in different hybrid composites, i.e. JJJ, KKK, JKJ and KJK. JKJ exhibited maximum flexural strength of 55.64 ± 2.8 MPa, whereas KJK exhibited maximum flexural modulus of 3.65 ± 0.2 GPa. The tensile strength, impact strength and Shore D hardness were maximum in case of KKK composite, having the value of 60 ± 3 MPa, 31.8 ± 1.6 kJ/m 2 and 58 ± 2.9, respectively. It can be concluded that the stacking sequence has a nominal effect on flexural strength, tensile strength and impact strength of the composites.
No takes yet. Share an insight, caveat, or question.
Singh et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: