Answers are grounded in this paper and cite their sources.
The capability to precisely fabricate and manipulate small-scale liquid metal droplets is important for the development of emerging technologies in the fields of micro-robotics, printable electronics, biomedical engineering, and nanocharacterization. However, the reproducible fabrication of liquid metal droplets with diameters at the micro- and sub-micrometer scale at a precisely defined location remains a key challenge towards realizing these applications. In this study, we demonstrate that sub-micron diameter liquid metal droplets can be fabricated in a reproducible manner via the combination of an electromigration and focused ion beam (FIB)-induced sputtering process. Electromigration is used to generate droplets at specific locations, and FIB sputtering is used to control the final diameter of the droplets. Using Galinstan as a case study, the method is established by analyzing the actual sputtering yield of Galinstan processed with different FIB parameters. The reproducibility of fabricating liquid metal droplets with a radius of 10 m and 5 m is experimentally investigated, resulting in standard deviations of 0.168 m and 0.63 m, respectively. The evaluated fabrication method is therefore expected to be well suited for developing liquid metal-based robotic actuators, drug delivery devices, and contact angle measurement (CAM) techniques carried out inside the scanning electron microscope (SEM).
No takes yet. Share an insight, caveat, or question.
Lei et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: