Background & Objectives: Ceftriaxone is an antibiotic which is extensively used to treat a number of various infections. It is mainly accumulated in water and sewage resulting in the environmental and health problems. This study is centered on the evaluation of the efficiency of a photocatalytic process using Fe3O4@SiO2@TiO2 in the removal of ceftriaxone from aqueous solutions. Methods: This research was based on an experimental-practical study. Fe3O4 @ SiO2 @ TiO2 was initially synthesized via a sol-gel method and characterized by SEM, XRD and EDX analyses. The effects of variables such as pH, catalyst concentration, ceftriaxone concentration, contact time, reusability tests (n=7) and degree of mineralization were separately assessed in a laboratory scale. The concentration of ceftriaxone was measured by HPLC at 240 nm. Results: Based on the results obtained, the highest process efficiency of 96.7% was obtained under the following optimal conditions: concentration of ceftriaxone 10 mg/L, pH=3, the catalyst dosage of 2 g/L and a time contact of 120 min. At the end of the process, the degree of mineralization was determined to be 83.7%. Additionally, the data regarding the reusability of the nanocatalyst demonstrated that a 5.2% loss in the removal efficiency was observed after 7 times of reuse. Finally, the results revealed that the removal process of ceftriaxone follows the first-order kinetic model. Conclusion: The results demonstrated that the photocatalytic process using the magnetic nanocatalyst (Fe3O4 @ SiO2 @ TiO2) could be effectively used for the removal of ceftriaxone from aqueous media.
No takes yet. Share an insight, caveat, or question.
Sobhi et al. (2020) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: