Answers are grounded in this paper and cite their sources.
Having studied the applied plastic recycling technologies, materials for 3D printing and the 3D printing technologies it is realized that the quantity and quality of plastic waste differs from country to country and from company to other , PET is recycled quite frequently and has the number "1" as its recycling symbol, and after drying PET prepared for extrusion, then material is shredded and dried, its ready to be extruded.The 'Next filament extruder' was used for the extrusion of PET (shredded format), with 3 different diameters of shredded material and constant range of temperature heater and speed of fan speed, the measurement can be ready after 3 or maximum 5 tests.After testing and measuring with different diameters, making filament from shredded PET will work better if it's made with a diameter of 1.75mm which means a thicker diameter is used, the filament will probably collapse under its own weight, causing the filament to swirl and jam in the filament sensor.
No takes yet. Share an insight, caveat, or question.
Oussai et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: