This is the authors' abstract. We don't add key points for this paper.
To illustrate the effectiveness and optimize the simultaneous removal of silicon impurities (SiI) and hardness from high-temperature heavy-oil-produced-water (HPW) by chemical coagulation-assisted electrocoagulation (CC-EC) process, the laboratory test was employed for revealing the performance, fitting the kinetics, analysis of the reaction process and optimization of reaction conditions, while a well operation pilot-scale test was evaluated for operational costs. As the result, after optimization the removal rate of SiI and hardness was 97.3 % and 98.4 % in laboratory test, respectively, which was better than 84.0 % and 96.0 % by traditional treatment method, respectively. The power consumption of CC-EC was not significantly increased, while the coagulant consumption was reduced by 78 % compared to the traditional treatment method. By reaction kinetics fitting with kinetic constant analysis, the synergy effect existed between CC and EC. The total operational costs of CC-EC process were 0.41 USD/m 3 in the pilot-scale test, with a reduction of 34.86 % compared to the traditional treatment method. CC-EC is a reliable treatment method for HPW reclaimed, so it has strong application potential in the treatment and reclaim of oilfield produced water and similar wastewater.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Bai et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: