Answers are grounded in this paper and cite their sources.
Depressurization method shows promise for methane hydrate (MH) reservoir production, but the reformation of hydrates due to a lack of geothermal heat presents a significant challenge for commercial production. This study proposes a novel approach for MH gas recovery by injecting a CO 2 -in-water (C/W) emulsion into an MH reservoir aquifer. The exothermic nature of CO 2 hydrate formation and liquid CO 2 dissolution in water in this method provides heat to the MH layer, effectively preventing hydrate reformation. Subsequently, 1-D numerical models were developed and implemented using the MATLAB Reservoir Simulation Toolbox (MRST). These models were rigorously validated against experimental data under homogeneous conditions and varying injection schemes. The investigation indicated that the average volume fraction of CO 2 hydrate within the hydrate particles was found to be 55% of the volume of liquid CO 2 droplets. The alternating C/W emulsion injection increased the driving force for CO 2 dissolution in water, thereby promoting subsequent hydrate particle decomposition and CO 2 hydrate dissolution in water, which effectively mitigated blockage within the porous medium. In conclusion, water alternating C/W emulsion injection, along with the continuous injection of a low volume fraction of liquid CO 2 within the C/W emulsion, exhibits promising potential for sustained injection and provides adequate heat to the MH layer, preventing hydrate reformation. Furthermore, the developed numerical model reasonably predicts the behavior of various injection schemes. This developed model can be used for devising long term sub-seabed carbon capture and storage development plan. • Accurate prediction of sudden pressure rise due to the blockage of pore throats by integrating the distinct contributions of pore throats and pore bodies into the permeability reduction model. • Comprehensive understanding of heat generation resulting from CO 2 dissolution and hydrate formation. • Identification of dynamic fluctuations in hydrate particle formation, underscoring the inherent complexity. • Assessment of water alternating CO 2 -in-water emulsion injection as a promising strategy for improving CO 2 dissolution rates and extending injectivity. • Recognition of the critical role of hydrate particle decomposition, driven by CO 2 solubility in the injected water, in extending injectivity during water alternating CO 2 -in-water emulsion injection.
No takes yet. Share an insight, caveat, or question.
Bahmaee et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: