This is the authors' abstract. We don't add key points for this paper.
Hypothesis Under fixed liquid properties and wettability, droplet impact on a woven mesh is governed by competition between impact inertia and pore-throat capillary resistance. Droplet-to-opening size matching and local impact geometry are expected to redistribute liquid momentum among neighboring wires and openings, thereby determining retention or penetration. Experiments and simulations Water droplets impacted a dry, single-layer stainless-steel woven (SSW) mesh. High-speed imaging resolved post-impact morphology, while Volume of Fluid (VOF) simulations, validated against the recorded sequences, quantified spreading, liquid retention, and the pressure and velocity fields over variations in Weber number ( We ), droplet diameter-to-opening ratio ( λ ), and impact location. Findings Retention (R), incomplete penetration (IP), and complete penetration (CP) were identified. Increasing We from 10 to 150 promoted pore-throat breakthrough and ligament growth, reducing the retention ratio ( η r ) from 100% to 5.40%. At We = 50 and pore-center impact, η r increased from 0.49% at λ = 1.00 to 37.52% at λ = 1.50, remained 36.71% at λ = 1.75, and decreased to 24.96% at λ = 2.00. Intermediate λ strengthened multi-wire capillary support, whereas larger λ increased liquid supply to the pore throats and intensified drainage. At We = 50 and λ = 1.50, moving impact from the pore center to the wire center and intersection reduced η r from 37.52% to 8.40% and 4.40%, because the mesh skeleton redirected liquid toward additional drainage paths. Retention is therefore controlled by the coupled effects of impact inertia, droplet-opening matching, and local impact geometry.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: