This is the authors' abstract. We don't add key points for this paper.
The addition of third elements to Al-based monotectic alloys can increase the alloy load capacity, and depending on the nature of the third element can also improve the tribological characteristics. In the present investigation 1.0 wt.%Sn is added to Al-Bi alloys of hypomonotectic, monotectic and hypermonotectic compositions, giving rise to microstructures typified by droplets of a self-lubricating mixture of Bi and Sn embedded in the Al-matrix. These alloys were directionally solidified with a view to permitting microstructures with a wide range of interphase spacings to be obtained. Micro-adhesive wear tests were carried out and experimental equations relating the wear volume, V, to the interphase spacing are proposed. A more homogeneous distribution of Bi/Sn droplets in the microstructure is shown to be conducive to lower V. The lowest wear rates and wear volumes are shown to be related to the monotectic composition (Al-3.2 wt.%Bi-1wt.%Sn alloy). The presence of higher fraction of Fe-oxide areas interrupting the Bi/Sn lubricant layer, is shown to induce inferior wear resistance for the hypermonotectic alloy (Al-7.0 wt.%Bi-1wt.%Sn) when compared with that of the monotectic alloy.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Costa et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: