Answers are grounded in this paper and cite their sources.
The defocusing of Gaussian laser spots is an established method in Powder Bed Fusion - Laser Beam (PBF-LB) to increase spot sizes and thereby associated manufacturing rates. However, the resulting effects of this beam widening technique on the melt pool characteristics in the additive manufacturing of molybdenum have not yet been described with Computational Fluid Dynamic (CFD) simulation backed data. Due to their extraordinary material properties, such as their extremely high melting points and thermal conductivities, e.g. 2620 °C and 142 W/(m·K) (at 20 °C), respectively for molybdenum, refractory metals and alloys inevitably demonstrate very distinct melt pool characteristics from that of non-refractory ones. Therefore, CFD simulations were performed using FLOW-3D and subsequently validated by experiments on commercially pure molybdenum. Thus, this work offers a valuable insight into the temporally limited fluid dynamical processes of a melt pool during the PBF-LB of molybdenum with defocused Gaussian laser beams – with diameters ranging from 100 μm to 140 μm – to describe the potential formation of keyhole pores and Kelvin-Helmholtz instability induced surface roughness in the solidified melt track.
No takes yet. Share an insight, caveat, or question.
Braun et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: