Answers are grounded in this paper and cite their sources.
Rotary electroplating was employed to fabricate high-strength nanotwinned copper (nt-Cu) foils serving as a current collector for high energy-density lithium ion batteries (LIBs). The effect of Cu ion concentration on the microstructural and mechanical properties of the nt-Cu foils was then investigated. Formation of nano-scaled grains was found at the bottom. Its size gradually increases toward the top surface to form a microstructural mixture of gradient nano-scaled and columnar grains in the upper region. Experimental results show that the grains and elongation of the nt-Cu foils increase with increasing concentration of Cu ions. However, a trade-off between tensile strength and elongation is present. The elongation of nt-Cu foils has been enhanced by 22% (from 3.1% to 3.8%) while 8.3% and 3.9% reductions in ultimate tensile strength (UTS) and yield stress (YS) are seen. The current study shows a promising method to tune and optimize the microstructure and mechanical properties of such nt-Cu foils for various applications.
No takes yet. Share an insight, caveat, or question.
Hung et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: