Answers are grounded in this paper and cite their sources.
Proper seismic imaging of detailed layer architecture has become increasingly important as geological CO 2 storage gains a growing role in climate change mitigation. Seismic monitoring of underground gas and CO 2 storage is challenging where reservoirs consist of thin, stacked layers. This study evaluates the reliability of post-stack acoustic impedance inversion for monitoring gas distribution and volumetrics in the Triassic Gassum Formation at the Stenlille underground gas storage facility, Denmark, as a case study. The analysis integrates reprocessed 3D seismic data, well logs, model-based acoustic impedance inversion, synthetic wedge modelling, and Monte Carlo volumetric estimation. The results show that the inversion improves thickness estimation relative to seismic amplitude interpretation and allows detection of isolated gas-bearing layers down to approximately 2–3 m thickness under noise-free conditions. However, reliable discrimination of stacked gas zones requires gross separation approaching approximately 10 m due to wavelet interference and limited seismic bandwidth. These limits explain the contrast between reservoir intervals: gas plume delineation is robust in the relatively thick and homogeneous Zone 5 reservoir unit, whereas interpretation in the thin, stacked Zones 1–3 reservoir units is strongly affected by vertical interference and wavelet-related uncertainty. Despite these limitations, Monte Carlo analysis indicates that interpreted gas volumes are consistent with recorded injection data, with injected volumes falling within the central 80% (P10–P90) of the simulated distributions. When detection limits, layer interference, and plume-delineation uncertainty are explicitly considered, acoustic impedance inversion can provide geologically and operationally meaningful monitoring constraints in thin-layered storage reservoirs. This reliability-based perspective is highly relevant to seismic monitoring of geological CO 2 storage in similarly layered settings, where robust plume imaging and storage-volume verification are important for monitoring design, operational monitoring, and long-term storage assurance.
No takes yet. Share an insight, caveat, or question.
Olsen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: