Answers are grounded in this paper and cite their sources.
Understanding how atmospheric thermal stability affects pollutant dispersion in urban building arrays is critical for improving air quality. This study integrates wind-tunnel experiments and computational fluid dynamics numerical simulations using the standard k-ε Reynolds-averaged Navier–Stokes model to investigate the dispersion characteristics of point/line sources within two typical building arrays: uniform-height (Uni) and non-uniform-height (Non-uni) arrays. Seven atmospheric stability conditions are considered, defined by the bulk Richardson number (Rib). Key new insights are revealed. (i) Two stability regimes control urban dispersion: when Rib ≤ −0.12, flow and concentration fields become effectively independent of Rib, with high mean velocity (approximately 40% of the free-stream velocity) and low pedestrian-level concentrations (average normalized concentration Kave ≈ 0.198). When Rib ≥ 0.43, cold-air subsidence suppresses vertical exchange, triggering reversed near-surface flows and upwind pollutant migration; Kave peaks at Rib = 0.43 (up to 8.045 for point sources). (ii) Building height heterogeneity redistributes exchange pathways: the Non-uni array enhances lateral and vertical dispersion of line sources under unstable conditions (normalized net escape velocity NEV* = 26% higher than Uni), but the taller buildings weaken vertical diffusion of point sources (NEV* = 17.3% lower than Uni). These findings quantify how stability and morphology jointly govern urban ventilation and pollutant removal, providing a mechanistic basis for climate-responsive urban design and emission-control strategies.
No takes yet. Share an insight, caveat, or question.
Cui et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: