Answers are grounded in this paper and cite their sources.
This study investigates the synergistic effects of abrasive concentration and WC grain size on the cavitation erosion behavior of cemented carbide (WC-Co). Super-depth-of-field microscopy, SEM and EDS revealed the surface morphology and microstructural of the eroded specimens, while numerical simulation of the ultrasonic vibration cavitation flow field was conducted to elucidate the underlying suppression mechanism of suspended solids. The results reveal distinct grain-size-dependent responses to increasing abrasive concentration. The results show that fine-grained WC0.5 exhibits a monotonic decline in mass loss with abrasive concentration (up to 34 %), while coarse-grained WC1.5 shows a rebound that eventually exceeds the pure-water baseline. The average cavitation erosion rate increases with grain size, with coarse specimens suffering severe grain pull-out and fracture versus uniform detachment in fine ones. Numerical simulation reveals that rising abrasive concentration increases liquid density, viscosity, and damping coefficient, thereby suppressing bubble wall motion and weakening cavitation intensity. Based on the competitive mechanism between cavitation suppression and abrasive erosion. A cavitation suppression model is established to quantify the relationship between abrasive concentration and average cavitation erosion rate. The model reproduces the experimental trends for three grain sizes, and the derived critical abrasive concentration and maximum suppression efficiency provide quantitative criteria for determining the optimal abrasive addition in applications. The results offer theoretical guidance for material selection and optimization under sand-laden conditions.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: