This is the authors' abstract. We don't add key points for this paper.
The iterative design of an integrated subharmonic receiver for 120-127 GHz is presented. The receiver consists of a single-ended low-noise amplifier (LNA), a push-push voltage-controlled oscillator (VCO) with 1/32 divider, a polyphase filter, and a subharmonic mixer. The receiver is fabricated in SiGe:C BiCMOS technology withfT/fmaxof 255 GHz/315 GHz. In the first design the differential down-conversion gain of the receiver is 25 dB at 127 GHz, and the corresponding noise figure (NF) is 11 dB. The 3 dB bandwidth reaches from 125 GHz to 129 GHz. The input 1 dB compression point is at - 40 dBm. The receiver draws 139 mA from a supply voltage of 3.3 V. A subsequent design demonstrates 31 dB differential gain at 122 GHz, and 11 dB NF. The 3 dB bandwidth is from 121 GHz to 124 GHz. The receiver has a NF of 8 dB for 3 GHz IF frequency due to integrated RF bandpass-filtering. It is realized by the lower NF of the LNA, and the LNA itself.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Schmalz et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: