Answers are grounded in this paper and cite their sources.
Two-dimensional simulations of transpiration cooling in a laminar, hypersonic boundary layer were performed using the thermochemical implicit nonequilibrium algorithm (TINA): a Navier–Stokes solver. Coolant concentration and heat flux results are compared to data obtained from laminar transpiration cooling experiments conducted in the Oxford High Density Tunnel employing a flat-plate geometry at Mach 7. TINA successfully predicts the mixing rate at the wall as a function of the streamwise direction for all blowing ratios. The simulations are more successful in predicting the mixing downstream of the injector as compared to the mixing on the injector: especially at low blowing ratios. A collapse of the thermal effectiveness values calculated from TINA simulation data is achieved, which agrees with laminar correlations within an absolute value of . It is shown that, when the concentration effectiveness is close to one at the injector, the temperature gradient becomes negative at locations immediately downstream of the injector, resulting in a negative heat flux. The acceleration of the coolant in the streamwise direction downstream promotes dissipation of energy, which results in a reduction in the temperature of the coolant, and thereby induces a negative temperature gradient close to the injector.
No takes yet. Share an insight, caveat, or question.
Ifti et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: