Answers are grounded in this paper and cite their sources.
Effective noise control without compromising airflow is increasingly required in the built environment, particularly for HVAC systems, facades, and flow-permeable noise barriers. Conventional sandwich structures with face sheets and cores provide high sound insulation but obstruct airflow, limiting their use in these applications. This study investigates the sound transmission loss (STL) of core-only triply periodic minimal surface (TPMS) acoustic metamaterials, including Primitive (P), Neovius (N), hybrid P+N, Diamond (D), F Rhombic Dodecahedron (FRD), and Fischer Koch Schoen (FKS) topologies. STL was evaluated numerically using pressure acoustics and thermoviscous models and validated experimentally using impedance tube measurements, while airflow performance was assessed through permeability and transport properties. Numerical predictions showed good agreement with experiments for all six investigated topologies at H = 20 mm. In the numerical topology comparison at H = 15 mm, topology N achieved the highest acoustic attenuation but the lowest permeability. For the baseline Neovius configuration ( L = 5 mm, φ = 80%, H = 15 mm), the strongest STL response occurs approximately within the 3–4 kHz range of the investigated 1–6 kHz band. Increasing thickness and decreasing porosity shift the attenuation toward lower frequencies, whereas increasing cell size reduces thermoviscous dissipation and overall STL. Further extension toward lower frequencies may be possible through appropriate tuning of TPMS topology and geometric parameters. The present results, therefore, establish a design framework for tuning flow-permeable TPMS structures to targeted acoustic frequency ranges while maintaining interconnected airflow.
No takes yet. Share an insight, caveat, or question.
Sirivuri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: