Answers are grounded in this paper and cite their sources.
This paper proposes a quantitative reliability design framework for pressureless sintered silver (PL-s-Ag) die-attach layers by characterizing their degradation under four levels of cyclic bending forces. The PL-s-Ag layer was bonded to a Ti-6Al-4V alloy substrate with a sputtered Ag surface at 300 °C for 10 min under 0.7 MPa. A nine-point bending test (NBT) was implemented to produce concentric principal tensile stress at 150 °C. Weibull plots of the degradation ratio (DR) after 50k NBT cycles, the ratio of degraded area to the total area via scanning acoustic tomography, exhibit linear trends despite their complex degradation morphology. The plots also reveal that a larger applied force level leads to a larger characteristic scale parameter (η) and a smaller shape parameter (m). This failure mode shift is further confirmed by multi-scale scanning electron microscopy (SEM) observations, transitioning from localized surface grain openings to an internal pore coalescence coupled with interfacial cracking. Finite element analysis (FEA) was performed to characterize the spatial distribution of the accumulated plastic strain (APS) per cycle, denoted as APSpc. The spatial distributions of APSpc are consistent with the morphological observations by SEM. The DR correlates with the APSpc averaged over the FEA analysis areas via a power-law relationship, indicating that the APSpc super-linearly increases the variation in the DR, thereby narrowing the reliable design window. Consequently, maintaining the mean APSpc below 1.5 × 10−3 is essential for ensuring the robust reliability of PL-s-Ag die-attach materials. (Note that the organization of the body of the paper is at the authors’ discretion; the only required sections are Introduction, Methods and Procedures, Results, Conclusion, and References. Acknowledgements and Appendices are encouraged but optional.)
No takes yet. Share an insight, caveat, or question.
Wakamoto et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: