Answers are grounded in this paper and cite their sources.
The radio-frequency (RF) performance of a 65-nm RF technology is assessed. The RF CMOS was fabricated with a physical gate length of 60 nm. In addition to the deep-n-well and p+-guard-ring isolation, a multi-poly-finger layout and fabrication process is optimized to improve the CMOS device RF performance. A superior cutoff frequencyfTof 250 GHz and a maximum oscillation frequencyfmaxof 220 GHz for the n-MOSFETs (NMOS) have been achieved. The minimum noise figures (NFmin's) are around 0.2 and 0.3 dB at 2.4 and 5.8 GHz, respectively. n+/n-well accumulation-mode MOS varactors, inductors, and metal-oxide-metal (MOM) capacitors are integrated with CMOS devices in a single chip by a standard logic process without extra masks. The tuning ratio of the varactor can be up to 12 with a peak quality (Q) factor of 20. The polysilicon-patterned ground shield and 3.7-¿m-thick Cu metal process are implemented to improve theQfactor of the inductors. The structure and performance of the MOM and metal-insulator-metal capacitors are benchmarked, and a mesh structure is proposed to reduce the mismatch of the MOM capacitors.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: