This is the authors' abstract. We don't add key points for this paper.
This article presents the results of experimental research on temperature fields formed during the drying of dispersed wet wood biomass piles. Based on the experiments, the influence of pile shape on the characteristics of the drying process was analyzed. Three distinct pile surface shapes were investigated: hemisphere, cone, and semi-toroid. The moisture removal procedure was conducted under conditions of identical initial masses (in a water-saturated state) of the dispersed wood pile. The research findings establish that a pile in the semi-toroid shape dries significantly faster compared to layers in the hemisphere and cone shapes. The dynamics of temperatures at characteristic points within wood biomass piles of different shapes during the drying period were determined. It was demonstrated that during drying, a non-monotonic temperature spectrum forms within the wood, within which relatively cold and heated zones can be distinguished. A comparative analysis of the temperature fields showed that the average temperature during the drying of a dispersed biomass pile in the semi-toroid shape is considerably higher than that observed during the drying of dispersed wood piles with conical or hemispherical shapes.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Syrodoy et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: