Answers are grounded in this paper and cite their sources.
Polyurethane foam (PUF) was synthesized from commercial polyether polyol and methylene diphenyl diisocyanate (MDI) to provide a representative model polyurethane for chemical upcycling. Due to its crosslinked solid structure, PUF was first liquefied via aminolysis with monoethanolamine (MEA) at 150 °C. Density functional theory (DFT) calculations provided additional insight into the differences in aminolysis observed under nitrogen and air. Excess MEA was subsequently removed by evaporation at 170 °C, and the remaining solution was aged overnight, yielding phase separation into a polyol-rich fraction (PRF) and 4,4′-methylenedianiline (MDA) rich phase. While the MDA-rich phase is typically treated as a byproduct, it can serve as a precursor for MDI. The PRF was then catalytically cracked over zeolite catalysts to produce value-added chemicals. A novel one-dimensional (1D) shaped H-MFI zeolite nanorod with enhanced external surface area and mesoporosity may contribute to interactions between polymers and catalysts. Compared to commercial H-ZSM-5, 1D-H-MFI exhibited higher selectivity toward propionaldehyde (61.8 wt% vs. 50.3 wt%) with 50% lower catalyst loading. This two-step strategy demonstrates the potential to upcycle commercial PUF into valuable chemicals.
No takes yet. Share an insight, caveat, or question.
Shikhaliyev et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: