Answers are grounded in this paper and cite their sources.
A partially Cr-substituted solid solution of a higher manganese silicide, (Mn1-x Cr x )Siγ, has been prepared by an arc-melting method and a subsequent annealing process. The compound consists of two tetragonal subsystems of [Mn1-x Cr x ] and [Si] with an irrational c-axis ratio, γ= c Mn/c Si. According to Vegard's rule, the solubility limit of Cr is determined at x = 0.20. With increasing Cr content x from 0 to 0.20, equivalent to increasing the hole carrier concentration, the a- and c Mn-axis lengths linearly increase, while the c Si-axis length gradually decreases. As expected from a valence electron counting rule, the electrical conductivity of (Mn1-x Cr x )Siγ increases with increasing x from 334 S·cm-1 (x = 0) to 727 S·cm-1 (x = 0.20) at room temperature. The Cr-substituted samples undergo a microscale domain separation; the sample with a nominal composition of x = 0.20 consists of Cr-rich (x∼0.3) and Mn-rich (x∼0.1) dendritic domains with a typical size of ∼100 µm. Despite the substantial increase in electrical conductivity, the total thermal conductivity decreases with increasing x owing to a marked reduction in lattice contribution. As a consequence, the dimensionless figure-of-merit ZT increases from 0.28 (x = 0) at 800 K to 0.45 (x = 0.20) at 900 K.
No takes yet. Share an insight, caveat, or question.
Miyazaki et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: