Answers are grounded in this paper and cite their sources.
L1 2 -strengthened high-entropy alloys (L1 2 -HEAs) are attractive structural materials owing to their excellent strength–ductility balance enabled by coherent ordered nanoprecipitates. However, their application to laser powder bed fusion (L-PBF) remains challenging because post-build aging frequently induces segregation-assisted precipitation of brittle intermetallic phases, causing severe ductility loss. This study demonstrates that this limitation can be overcome by combining thermodynamic alloy design with a direct aging strategy that introduces microstructural heterogeneity through partial recrystallization. An L1 2 -HEA with a nominal composition of Cr 15 Fe 15 Co 31 Ni 31 Al 4 Ti 4 (at.%) was designed to widen the FCC–L1 2 phase stability window and suppress brittle phase formation under additive manufacturing conditions. The alloy was fabricated by L-PBF and subsequently subjected to direct aging of the as-built microstructure. This processing route induces partial recrystallization, producing a heterogeneous grain structure consisting of fine recrystallized grains embedded within coarse columnar grains, together with a uniform distribution of coherent L1 2 nanoprecipitates. A conventional recrystallization-and-aging treatment yields a homogeneous grain structure with similar precipitate characteristics. The directly aged alloy exhibits a superior strength–ductility balance, achieving a yield strength of 1115 MPa, an ultimate tensile strength of 1565 MPa, and a uniform elongation of 18.1%. Deformation analyses reveal that fine coherent L1 2 nanoprecipitates contribute to planar-slip-dominated deformation, while grain-size heterogeneity activates pronounced hetero-deformation-induced (HDI) hardening through strain partitioning and dislocation pile-up. Cyclic loading–unloading–reloading tests further confirm an enhanced back-stress contribution in the heterogeneous microstructure. These results establish partial recrystallization as an effective microstructural design strategy for improving strain hardening and mechanical performance in additively manufactured L1 2 -HEAs.
No takes yet. Share an insight, caveat, or question.
Nam et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: