Answers are grounded in this paper and cite their sources.
Conventional direct-drive direct current (dc) septum magnets suffer from a high current density in the drive coil, which can cause magnet failures such as coil shorting due to the strong heat cycles, and result in large power consumption.Requirements for a thin septum and narrow gap in the magnet design naturally limit the space for coils, causing a high current density to be inevitably applied to the small cross-section coils.In this paper, we presented a new design for a dc septum magnet that largely decreased the current density and power consumption, while keeping an injection amplitude using a thin dogleg-shaped septum.According to our design comparison, the current density and power consumption were reduced from 145 A=mm 2 and 24.5 kW for the conventional direct-drive configuration to 4.5 A=mm 2 and 1.0 kW, respectively.The primary idea presented in paper leads to a power reduction of a factor of 25.We also detailed the fabrication process and magnet performance of the dc septum magnet developed for the next generation light source.
No takes yet. Share an insight, caveat, or question.
Yamaguchi et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: