Answers are grounded in this paper and cite their sources.
In this paper, a three-layer system is considered, consisting of two piezoelectric layers and one polymer layer (polyurethane). Polyurethane (PU), as a fixed layer, is located between two piezoelectric layers. Zinc Oxide (ZnO) and Aluminum Nitride (AlN), as the piezoelectric materials, were used for the other two layers. The propagation of Love waves (LWs) is theoretically investigated in the system. In order to better understand the results, two different cases are proposed. (i) A symmetric structure (AlN/PU/AlN and ZnO/PU/ZnO), and (ii) an asymmetric structure (AlN/PU/ZnO and ZnO/PU/AlN). In each case, the effect of middle layer thickness on the propagation of LWs is investigated. Also, the influence of upper layer thickness on the propagation of LWs was studied. When the upper-layer thickness approaches zero, the wave propagates almost completely into the substrate. For a thin upper layer, the acoustic wave is not confined to one layer and part of its energy penetrates the middle PU layer. The presence of the PU in the system, due to the very low phase velocity of the PU, causes the effective phase velocity of the entire system to be decreased sharply. The results show that the thickness of the middle layer is an important factor in the propagation of LWs. By adjusting the thickness of the PU in the asymmetric structure (ZnO/PU/AlN), we can obtain a very powerful control tool for sensing applications.
No takes yet. Share an insight, caveat, or question.
Khordad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: