Answers are grounded in this paper and cite their sources.
In this paper, the effect of gamma‐ray irradiation on the electrical conductivity of polypropylene (PP) composites has been studied. The samples are prepared using PP and styrene–ethylene–butylene–styrene elastomer with contents ranging from 0 wt% to 50 wt%, and exposed to Cobalt‐60 gamma irradiation, with a dose from 0 to 250 kGy. Electrical conductivities at different temperatures and trap distributions are measured to observe the deterioration of insulation performance. The microstructure of the sample is estimated using differential scanning calorimetry, X‐ray diffraction, thermogravimetric analysis and a scanning electron microscope. The obtained results demonstrate a correlation between the increase in electrical conductivity and the elevation in both total dose and temperature. At 250 kGy, the trap distribution tends to become shallower, accompanied by a decrease in crystallinity, melting and decomposition temperatures of the sample. The PP composite exhibits better stability against irradiation and thermal effects, primarily due to the cross‐linked structures formed by irradiation.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: