Answers are grounded in this paper and cite their sources.
The design of resilient offshore structures requires knowledge of the prevailing seabed dynamics under wave-induced loading. In particular, seabed liquefaction as one of the most severe forms of seabed dynamics must be understood to prevent structural failure. Progressing toward such knowledge and insights, the present paper analyzes the results of a unique large-scale experimental test campaign of wave–soil interaction and seabed liquefaction in the large wave-current flume, GWK+, at the Coastal Research Centre, Hannover, Germany. Being embedded in a comprehensive test campaign, this paper presents Part I of this campaign, while a companion paper concerns wave–structure–soil interaction. For the study, a 1m×6m×5m (depth × length × width) soil pit was set up in the flume, filled with fine sand with D50=0.066mm, and exposed to waves of varying wave heights. The results showed that it is possible to trigger liquefaction for specific wave conditions, i.e., wave heights ≥0.86 m, with the experimental setup and that the excess pore pressure follows the previously observed sequence. In addition, a discussion of model effects and uncertainties provides suggestions for future improvements in the experimental setup.
No takes yet. Share an insight, caveat, or question.
Windt et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: