Answers are grounded in this paper and cite their sources.
A thorough evaluation on selecting a bondable laser release material for redistribution layer (RDL)-first and die-first fan-out wafer-level packaging (FOWLP) is presented in this article. Four laser release materials were identified based on their absorption coefficient at 355 nm. In addition, all four of these materials possess thermal stability above 350 °C and pull-off adhesion on a Ti/Cu layer greater than 8 psi, further illustrating their compatibility in FOWLP. To further evaluate these materials, focus ion beam (FIB) inspection was used to examine the profile of a single-pulse laser ablation region, ensuring free penetration of 355-nm laser energy. With a designated die bonding test vehicle, die shift less than 1.5μ mand rotation less than 0.02° before and after molding was achieved with the material bondable at temperatures lower than 200 °C. Furthermore, this same material required a laser energy of less than 3 W for laser release. A bondable laser release material that eliminates the requirement for a die attach material from the traditional process flow facilitates the development of cost-effective FOWLP.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: