This is the authors' abstract. We don't add key points for this paper.
High-performance anode materials are essential for improving lithium-ion battery (LiB) technology. In this work, we synthesized and studied a ternary composite of NGO, SiO 2 , and PANI as a new anode material. The PANI was improved by varying monomer and acid concentrations. The best-performing type (0.3 M aniline, 3 M H 2 SO 4 ) demonstrated good electrical conductivity and surface area. Electrochemical doping was used to create NGO, which has nitrogen defects that improve Li + adsorption and conductivity. The composite electrodes (N0: N-GO-SiO 2 ; N1: high N-GO:PANI ratio; N2: low N-GO:PANI ratio) have been investigated in both half-cell and full-cell configuration. The N1 composite displayed outstanding electrochemical performance, giving a high initial discharge capacity of 1125 mAh g −1 at 0.1 C and maintaining 200 mAh g −1 at 10 C. Cycling stability was excellent, with just 8.5% capacity loss after 100 cycles. In contrast, the N2 composite had PANI-induced mechanical instability, and the N0 sample (without PANI) had low-rate capability due to inadequate conductivity. A full-cell battery (N1 || LiFePO 4 ) demonstrated practical viability, exceeding traditional graphite anodes in capacity and cycle efficiency. The combination of N-GO (conductivity), SiO 2 (high capacity), and PANI (redox activity/flexibility) shows promise for next-generation LiB anodes.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Al-Bujasim et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: