Answers are grounded in this paper and cite their sources.
Near-surface mounted (NSM) strengthening with carbon fibre reinforced polymer (CFRP) has emerged as promising alternative to externally bonded (EB) method, yet conventional NSM-CFRP strips experience debonding hindering its full utilization. This study addresses modified NSM utilizing carbon fibre strand sheets (CFSSs) to enhance bond and composite action, validating its reliability and effectiveness through three experimental series. Series-I assessed bond performance through pull-out test, comparing conventional CFRP strips, carbon fibre sheets (CFSs) and CFSSs, alongside surface texture modification and groove filler materials. NSM systems achieved 1.5-3.4 times higher bond capacity than EB with identical axial stiffness. NSM-CFSs and NSM-CFSSs significantly improved bond strength and interfacial fracture energy compared to NSM-CFRP strips that experienced debonding, demonstrating rupture-controlled failure and better composite action. Series-II validated bond-level advantages to structural-level performance through RC beams flexural test. NSM-CFSSs increased ultimate load by 72% over unstrengthened cases with full (100%) CFRP utilization, whereas EB- and NSM-CFRP strips achieved only 8–31% increases and were constrained by debonding to 34-60% utilization. Series-III conducted parametric study on NSM-CFSSs via pull-out tests. CFSSs axial stiffness and bond length were identified as primary factors affecting bond behavior, while concrete strength and groove dimensions had secondary impact under adequate confinement. Pull-out capacity increased with axial stiffness under rupture-controlled behavior, while excessive stiffness promoted debonding due to stress concentration, and effective stress transfer necessitates bond length of 125–175 mm. Overall, modified NSM-CFSSs outperformed EB and NSM-CFRP strips system in strength, ductility, reliability and material utilization, underscoring its effectiveness for strengthening RC members.
No takes yet. Share an insight, caveat, or question.
Mizan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: