Answers are grounded in this paper and cite their sources.
There is currently a gap in the available literature on retrofitting engines with less-advanced control systems to run on hydrogen-enriched natural gas. Potential advantages of hydrogen-enriched natural gas in these engines may not be realized without altering parameters such as spark-timing, exhaust gas recirculation, or the air/fuel ratio. However, in such engines, changes in spark-timing and exhaust gas recycle are often cost-prohibitive, leaving equivalence ratio adjustments as one of the few remaining viable operational strategies. In this study, a small-displacement (319 cc), naturally aspirated, single-cylinder gasoline engine without spark-timing control was converted to run on a 10 vol% blend of hydrogen-enriched natural gas. Stoichiometric operation improved thermal efficiency, fuel consumption, and total hydrocarbon emissions, but higher NOx emissions resulted. Despite no spark-timing control, lean-burn operation at an equivalence ratio of 0.7 was found to maintain performance improvements while also lowering emissions: fuel consumption was lowered versus the methane base case by 11%, and NOx and hydrocarbon emissions were both decreased by approximately 70% below the base case. This study concludes that in a scenario even without spark-timing control, the addition of 10 vol% hydrogen can improve power, emissions, and efficiency of a spark-ignited natural gas engine, which serves as a proof-of-concept that even fairly simple, small-displacement engines can benefit from switching from gasoline to hydrogen-enriched natural gas operation.
No takes yet. Share an insight, caveat, or question.
Baumgardner et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: