Effect of High-Energy Ignition and Spark Plug on Combustion and Fuel Economy of a Dedicated Hybrid Engine

High exhaust gas recirculation (EGR) rates in dedicated hybrid engines (DHEs) cause combustion instability and fuel economy degradation. This study investigates a 2.0L turbocharged DHE with a high-tumble combustion system optimized by computational fluid dynamics (CFD) simulation. At the brake thermal efficiency (BTE) operating point (2750 r/min, brake mean effective pressure [BMEP] 11 bar), engine bench tests evaluated the effects of three ignition energy levels (120 mJ, 150 mJ, 200 mJ) and two spark plug configurations (1.1 mm nickel alloy and 0.7 mm pin-to-pin iridium) on combustion characteristics, fuel economy, the misfire-limited EGR rate (hereinafter the EGR misfire limit), and engine-out emissions. Results show that above 23% EGR, intake condensate weakens ignition and destabilizes combustion. Raising ignition energy to 200 mJ extends the EGR misfire limit from 23% to 28%, shortens ignition delay (CA0-10) and combustion duration (CA10-90) by 4.5°CA and 2.8°CA and reduces BSFC by 3.2 g/kWh. The 0.7-mm iridium plug outperforms the 1.1-mm nickel alloy plug above 27% EGR: CA0-10 and CA10-90 shorten by 2.9°CA and 2.5°CA, the EGR misfire limit extends by 0.5 percentage points, and BSFC improves by 0.9 g/kWh. The combined optimization extends the EGR misfire limit to 28.5% with a cumulative BSFC reduction of 4.5 g/kWh. HC emissions decrease with reduced spark plug gap, while NOx and CO remain insensitive to the ignition strategy. The coupled optimization of high-energy ignition and small-gap spark plug effectively overcomes ignition degradation under high EGR. The reduced breakdown voltage of the small gap and the sufficient energy reserve of high-energy ignition form a synergistic effect, providing quantitative design guidance for ignition systems in next-generation high-efficiency DHEs.