Answers are grounded in this paper and cite their sources.
50wt%3.247Ω49.01±1.95S/mFused deposition modeling (FDM) offers distinct advantages for rapidly and cost-effectively fabricating complex parts. A key innovation entails fabricating conductive parts using conductive filaments for smart devices, sensors, medical equipment, and wearable electronics. However, conventional conductive filaments are severely bottlenecked by filler loading limits, causing poor conductivity, brittleness, and nozzle clogging. Here, a high-pressure injection molding route is demonstrated as a proof of concept for fabricating highly loaded conductive composite filaments. Thermoplastic polyurethane (TPU) and micro-graphite flakes were compounded at an equal 50:50 weight ratio. Electrical characterization demonstrated high reproducibility, yielding an average effective bulk resistivity of 0.0204Ω.m and a conductivity of 49.01±1.95S/m. Crucially, the fabricated filaments preserved qualitative mechanical flexibility without brittle fracture, demonstrating potential for flexible electronics. Furthermore, cross-sectional SEM confirmed a uniform, void-free matrix, while 3D printing through a restrictive 0.2 mm micro-nozzle demonstrated stable melt flow, strand integrity, and complete prevention of nozzle clogging.
No takes yet. Share an insight, caveat, or question.
Seyed Sina Zabihi (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: