Answers are grounded in this paper and cite their sources.
Drilling of carbon fiber reinforced polymer (CFRP) composites is a damage-prone machining operation in which defects such as delamination, poor surface integrity, and geometric inaccuracy can degrade structural performance. Achieving high-quality holes requires careful selection of process parameters while accounting for multiple, often conflicting, quality criteria. This study presents a predictive optimization framework for CFRP drilling that integrates machine-learning-based response prediction with multi-criteria decision analysis. Drilling experiments were conducted on a CNC milling center using coated and uncoated drills under different cutting conditions, and hole quality metrics including delamination, surface roughness, and circularity error were evaluated. A Random Forest regression model was trained to predict drilling-induced defects ( Fd , Ra , C ) from process parameters, while CoCoSo, MABAC, and TOPSIS methods were applied to the experimentally measured decision matrix to rank the 27 tested parameter combinations. A hybrid Analytic Hierarchy Process entropy weighting method was adopted to balance subjective and objective data. The TiN-coated drill at 2250 rpm and 0.025 mm/rev, which yielded the lowest surface roughness (Ra = 5.598 µm) among the tested conditions, was consistently identified as the top-ranked alternative by CoCoSo and MABAC and second-ranked by TOPSIS. The TiN-coated drill at 3200 rpm and 0.025 mm/rev, which yielded the lowest delamination factor ( Fd = 1.046), was ranked first only by TOPSIS. Predicted responses showed close agreement with experiments ( R 2 = 0.82–0.88), and sensitivity analysis confirmed the stability of these rankings under varying criteria weights.
No takes yet. Share an insight, caveat, or question.
Barik et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: