Answers are grounded in this paper and cite their sources.
Alkaline water electrolysis requires electrodes that combine high oxygen evolution reaction (OER) activity with manufacturability. In this work, we fabricate OER-architected titanium electrodes via selective laser sintering and functionalize them with Ni- and NiFe-layered double hydroxides (LDHs). We observe that without a Ni seed layer, NiFe-LDH grows only weakly on the Ti architecture. This is evidenced by comparing the Ti architecture, the Ti architecture coated with Ni (Ti@Ni), the Ti architecture coated with LDH (Ti@LDH), and the full-layer assembly of the Ti architecture coated with Ni, followed by LDH growth (Ti@Ni/LDH). Morphological and chemical characterization using SEM−EDX, XRD, XPS, and STEM confirms the presence of a NiFe-LDH coating throughout the complex metallic architecture. Electrochemical double-layer capacitance indicates that functionalization modifies the electrochemical surface area, increasing from 57.23 cm2 for the Ti@Ni/LDH architecture to 69.90 cm2 for the Ti@Ni architecture. Although the electrochemical surface area varies slightly between architectures, the electrochemical overpotential remains the lowest for the Ti@Ni/LDH architecture, ca. 362 mV. Furthermore, the architectures influence reaction kinetics, with Tafel slopes decreasing from 203 mV dec−1 for the bare Ti electrode to 119 mV dec−1 with Ti@Ni and then improving with LDH deposition to 47 mV dec−1. The results demonstrate that the composition of 3D metal electrodes influences NiFe-LDH growth and, in turn, electrochemical surface area, overpotential, and interfacial charge transport. The results are expected to establish additively manufactured metallic-coated substrates as a viable platform for water-electrolysis electrodes in OER.
No takes yet. Share an insight, caveat, or question.
Cazac et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: