Answers are grounded in this paper and cite their sources.
Continuous-wave laser post-treatment was employed to regulate the β-gallium oxide (Ga2O3)/zinc oxide (ZnO) heterointerface and to induce rapid phase evolution. A 61.85 nm Ga2O3 film was deposited on ZnO(001), followed by laser treatment at 250, 270, and 290 W. X-ray diffraction showed that no distinct new crystalline phase was detected at 250 W, while a broad interfacial diffraction feature appeared at 270 W and evolved into resolvable reflections at 290 W, which are assigned to the ZnGa2O4 spinel phase. Time-of-flight secondary ion mass spectrometry revealed that laser treatment activated Zn–Ga interdiffusion, with Zn diffusion from the ZnO substrate into the Ga2O3 layer already observable at 250 and 270 W, and becoming much more extensive at 290 W. X-ray photoelectron spectroscopy further showed that the near-surface Ga:Zn atomic ratio changed from 1:0.016 in the As-deposited sample to 1:0.131 after treatment at 290 W, consistent with substantial compositional reconstruction. O K-edge x-ray absorption near-edge structure spectra indicated a pronounced modification of the local oxygen coordination environment at high power. These structural and chemical changes were accompanied by clear variations in electrical transport and defect-related photoluminescence response. The results demonstrate that continuous-wave laser post-treatment provides a rapid and spatially controllable route for interfacial phase engineering in oxide heterostructures, with potential applications in tunable oxide electronic and optoelectronic devices.
No takes yet. Share an insight, caveat, or question.
Weng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: