Answers are grounded in this paper and cite their sources.
The effectiveness of Geocell Anchor Cage (GAC) system as a structural add-on to conventional geocell reinforcement was earlier established by the authors. However, design parameters for this GAC system to achieve enhanced reinforcing benefits and its applicability to different soil-geocell systems remain unexplored. This paper presents comprehensive investigation on the design of geocell-GAC systems for load-bearing applications through experimental, analytical, and numerical studies. To eliminate scaling issues, customised 3D printed geocells made of polypropylene and GACs made of polylactic acid are used in experiments. The specific contribution of GAC to the overall increase in load capacity and settlement reduction with changing geocell and GAC parameters and soil density is quantified. Further, various design parameters of GAC system, including pin diameter and rib dimensions for deriving improved reinforcing benefits, are obtained from plate load tests. The benefits of GAC are found to be more significant for geocells of lower stiffness, larger pocket sizes, shorter geocell heights, and for soils of lower density. Width of GAC can be limited to 1.5 times the foundation width in a geocell layer of 3.5 times the foundation width for optimal benefits. A semi-empirical analytical equation is developed to predict pressure-settlement response of geocell-GAC sand beds.
No takes yet. Share an insight, caveat, or question.
Krishna et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: