Answers are grounded in this paper and cite their sources.
Zirconia-rich high-entropy oxides (HEOs) are attractive as configurational entropy stabilizes multicomponent solid solutions and enables defect engineering beyond conventional zirconia. A non-equimolar ZrO 2 -based HEO of composition Zr 0.467 Ce 0.111 Mg 0.111 Ca 0.111 Sc 0.028 Gd 0.017 Yb 0.017 Ti 0.088 Al 0.001 Nb 0.049 O 2-d was synthesized by solution combustion and solid-state routes, consolidated by conventional sintering and spark plasma sintering (SPS). Both routes yielded single-phase tetragonal powder after calcination at 1200 °C. Powder morphology depended on route: porous agglomerates from combustion versus finer equiaxed particles from solid-state, controlling densification in conventional sintering, while SPS produced near-fully dense ceramics irrespective of precursor. SPS induced a reversible phase change: as-sintered samples contained dominant cubic and pyrochlore phases with reduced Ce and high oxygen-vacancy states; oxidative annealing restored single tetragonal phase. Dense SPS ceramics exhibited Vickers hardness 10.1–10.9 GPa, Young’s modulus 205–230 GPa and Poisson’s ratio 0.34–0.39 (highest in reduced state). Entropy stabilization, multivalent cation chemistry and processing-induced vacancy control enable tuning of phase stability and mechanical response in zirconia-based HEOs.
No takes yet. Share an insight, caveat, or question.
Bastrikov et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: