Answers are grounded in this paper and cite their sources.
In SCR of NOx from lean burn engine, V 2 O 5 /WO 3 /TiO 2 and NH 3 /urea are used as the established industrial catalyst and reductant, respectively. Our study aims at modifying the VWTi catalyst to replace NH 3 and/or urea with CO and HC as reductants. Through this study we attempt to prove the concept of reducing the cost of SCR systems by using reductants such as CO and HC which are inherently present in exhaust emissions. More specifically, in this study Co-promoted VWTi SCR catalysts were prepared by the wet-impregnation method and have been used for the SCR of NOx with HC and CO in the presence of excess oxygen. Among different catalysts, 0.3CoVWTi rc calcined in 4.5% CO in air flowing mixture exhibited higher specific surface area and smaller pore volume as compared to 0.3CoVWT sa catalyst. Our XRD studies displayed amorphous nature of the components highly dispersed on the surface of the TiO 2 support. SEM micrographs of 0.3Co-VWTi rc catalyst disclosed its uniform grain size and homogeneous granular surface. The XPS studies of the active catalysts showed that vanadium mainly exists as the V 5+ oxidation state and the tungsten exists as the W 6+ oxidation state. This study also revealed the presence of the chemisorbed surface oxygen which are beneficial for NO reduction reaction. Our results show that the catalytic activity of the 0.3% Co-VWTi catalyst was greatly enhanced over the traditional catalysts with CO and HC. This catalyst was also found to be highly selective for N 2 for temperatures up to 390 o C.
No takes yet. Share an insight, caveat, or question.
Selvam et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: