Answers are grounded in this paper and cite their sources.
Fused deposition modeling (FDM) is a fabrication technology that offers significant advantages for the wind energy industry, particularly in the areas of product design, prototyping, and manufacturing. However, parts produced via FDM often exhibit a relatively rough surface finish due to the intrinsic layer-by-layer process. This study assessed chemical and mechanical treatments aimed at reducing the surface roughness of airfoils fabricated using acrylonitrile-butadiene-styrene (ABS), one of the most widely used polymers in FDM. Surface roughness was characterized using scanning electron microscopy (SEM) and profilometry. Two chemical treatments were evaluated: acetone immersion and acetone vapor exposure. SEM and profilometry revealed crack formation in samples treated by immersion, while vapor exposure resulted in a significantly smoother finish without cracks. Wind tunnel tests demonstrated a 27% increase in the aerodynamic lift-to-drag ratio for airfoils treated with acetone vapor, indicating an improved aerodynamic performance.
No takes yet. Share an insight, caveat, or question.
Matamoros et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: