Answers are grounded in this paper and cite their sources.
Multi-wheel wall-climbing robots operating on cylindrical inner surfaces are subject to configuration-dependent wheel-surface contacts and nonholonomic rolling constraints, making planar differential-drive or fixed-contact kinematic models insufficient when the active contact topology changes. This study develops a mode-dependent differential-algebraic kinematic model for a four-wheel wall-climbing robot on cylindrical inner surfaces. Given the instantaneous active contact set, the wheel-surface geometry is reconstructed from nonlinear point-on-surface and tangency constraints using an adaptive Levenberg–Marquardt method. The reconstructed contact geometry is then used to assemble normal-velocity compatibility and rolling constraints, yielding an analytical mapping from a nominal body-twist reference to active-wheel speed commands. The model is integrated into trajectory-based motion generation and assessed through multibody co-simulation incorporating contact and friction effects. For unidirectional and S-shaped motions, the axial root-mean-square errors (RMSEs) are 5.6 mm and 11.5 mm, with normalized axial errors of 0.112% and 0.096%, respectively; the circumferential-angle RMSEs are 1.25∘ and 1.32∘, with normalized angular errors of 1.39% and 0.73%. These results demonstrate the applicability of the model to contact-dependent geometric reconstruction and wheel-speed command generation under varying multi-wheel contact topologies on cylindrical inner surfaces, and offer an extensible approach to the kinematic modeling of multi-wheel locomotion in cylindrical environments.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: