Answers are grounded in this paper and cite their sources.
The effect of high‐energy ion implantation of oxygen into a thin film of poly(ethylene terephthalate) (PET) was studied by Fourier transform infrared spectroscopy and differential scanning calorimetry (DSC). Mylar samples 13 μm thick were implanted with 6‐MeV oxygen ions at fluences ranging from 5 × 1012 to 2 × 1014 ions/cm2. The DSC data showed a substantial loss of crystallinity, even at the lowest fluence, which extended deeper into the polymer film than the predicted range for oxygen deceleration in PET. Solubility measurements indicated the presence of cross‐linking, especially at the highest fluence, but bands due to cross‐linking could not be detected in the infrared. The trans/gauche ratio for the glycol group conformation was measured by a pair of conformationally sensitive infrared bands. Surprisingly, the conformation of the glycol segments did not change appreciably with increasing fluence, although crystallinity decreased and degree of cross‐linking increased. The implications these results have on possible mechanisms of chemical and physical alterations of the polymer structure by ion implantation are discussed.
No takes yet. Share an insight, caveat, or question.
Balik et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: