Answers are grounded in this paper and cite their sources.
This study investigates the influence of five constitutive models on the accuracy of finite element (FE) and smoothed particle hydrodynamics (SPH) simulations of solid particle erosion (SPE) on Ti-6Al-4V alloy. Using a validated image-processing algorithm, 1521 angular alumina particles with realistic irregular geometries were generated. The SPE process was modeled as a micro-scale multiple-impact phenomenon, at oblique (35°) and normal (90°) impact angles and 3 particle velocities (35, 100, and 165 m/s). The constitutive equations – Johnson-Cook (JC), JC-Cowper-Symonds (JC-CS), Khan-Huang-Liang (KHL), Zerilli-Armstrong (ZA), and a coupled JC-ZA model – were implemented in ABAQUS/Explicit via user subroutines. Erosion rate and surface scar topography parameters ( a b and d h ) were compared with precise gravimetric measurements and 3D laser profilometry. The JC-ZA model achieved the highest overall accuracy: average relative errors of 11.99% (SPH) and 18.43% (FE) for erosion rate, and below 8% (SPH) for a b in oblique impacts. SPH proved superior at high velocities, whereas FE was more reliable at low ones. The velocity exponent of the erosion rate was consistent across all models and experimental data (∼2.5), independent of numerical method or constitutive equation. The results show that JC-ZA with SPH provides the most accurate predictions among the tested combinations for the specific conditions studied and highlight the necessity of physically based constitutive models at high strain rates (>10 5 s −1 ).
No takes yet. Share an insight, caveat, or question.
Khoddami et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: