Answers are grounded in this paper and cite their sources.
In inductive wireless power transfer (WPT) for electric vehicles (EVs), final pad-to-coil alignment is critical because centimeter-class lateral displacement or yaw misalignment can degrade magnetic coupling, reduce transfer efficiency, and increase charging time. This motivates millimeter-class planar-position accuracy and sub-degree yaw estimation. This paper presents a calibrated ultra-wideband (UWB) relative pose estimation framework that fuses time-of-flight (ToF) and phase-difference-of-arrival (PDoA) measurements. The system consists of a four-element UWB anchor unit integrated with the transmitter pad and four synchronized UWB modules rigidly mounted around the receiver-coil region on the vehicle. ToF measurements provide a robust initialization in the correct geometric basin, while wrapped PDoA measurements supply high-resolution local constraints for pose refinement. Angle- and distance-dependent biases in both ToF and carrier-phase measurements are calibrated offline and compensated online. Because phase wrapping makes the joint ToF+PDoA objective highly nonconvex, the pose is estimated in two stages: gradient-based ToF initialization followed by particle-filter-based joint refinement under rigid-body constraints. In a static pose-grid simulation, the proposed method achieves p50/p90 planar-position errors of $10.97/43.46$ mm and p50/p90 yaw errors of 0.38^∘ /1.21^∘ . Hardware experiments with a scaled vehicle mockup further validate the sensing chain at the final stopping pose. Across 200 repeated UWB updates, the proposed method achieves p50/p90 planar alignment errors of 2.32/4.23 mm and p50/p90 yaw errors of 0.25^∘ /0.72^∘ after bias compensation. These results demonstrate millimeter-class final stopping-pose alignment in a controlled scaled testbed.
No takes yet. Share an insight, caveat, or question.
Hada et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: